东日韩二三区_啪啪啪毛片_日韩专区在线播放_男人吃咪咪视频

Automatic CNC lathe care and maintenance in daily work
1. The position of the metal processing automation equipment shall not be arbitrarily changed during the use of the automatic lathe.
2. Automated lathes should be repaired by professional staff when the metal processing automation equipment fails.
3. After 12 hours of automatic lathe metal processing automation equipment, take a proper rest for half an hour to an hour.
4. When it is not necessary to use the lathe metal processing automation equipment, simply turn off the lathe metal processing automation equipment.
5. Pay attention to clean the surface of the mechanical wrist of the CNC lathe at all times to ensure the cleaning of the mechanical surface of the CNC lathe.
6. During use, be careful not to let work, tools, waste, etc. collide with lathe metal processing automation equipment.
7. When performing corresponding maintenance on the metal processing automation equipment, it is necessary to first intercept the electric survey and then carry out the reasonable maintenance of the equipment according to the corresponding maintenance methods, so that the equipment plays a good role in people's applications. Utility value.
8. When the metal processing automation equipment is properly maintained, it should be cleaned on schedule. When applied to its machinery, its products can be said to be a high-precision, high-efficiency automated machine tool. When people care for their products, their equipment is also easy for people to maintain. And when the lathe is being maintained, the working accuracy of the lathe should also be guaranteed. Therefore, when the lathe is to be maintained, it should be properly maintained according to the scale maintenance method.
9. Automated lathe metal processing automation equipment should be operated by specially trained staff and maintained by a dedicated person. The main motion pair of the CNC feeder should maintain good lubrication. For the screw pair and the moving guide shaft pair, if the lubricating grease is applied, the lubricating oil should be added 1-2 times per week depending on the usage; if the artificially dispersed lubricating oil is used, the main movement should be applied to the main movement. lubricating oil.